Note: If this doesn't answer your question, please contact us and a member of our team will be in touch shortly.


TABLE OF CONTENTS


WHAT DOES THE #7 MEAN AT THE BOTTOM BASE OF MY PRODUCT?

Our products are FDA tested and approved, and all contact surfaces are guaranteed to be safe and BPS/BPA-free. There are seven classes of plastics. Type 7 is the catch-all "other" class. Because our products are made of multiple materials, we are obligated to use the Type 7 code. However, as mentioned previously, any surface that comes into contact with food or beverage does not contain BPS or BPA.


HOW DO I GET THE BEST PERFORMANCE (HOT/COLD RETENTION) FROM MY VACUUM BOTTLE? (STANLEY ONLY)

Preheat or precool your vacuum bottle, mug, or food jar by filling it with warm or cold tap water. Let stand for five minutes. Empty the bottle and immediately fill with your favorite hot or cold beverage. Lastly, secure the stopper and lid as quickly as possible to avoid heat loss.


WHAT TYPE OF STAINLESS STEEL WAS USED IN MY PRODUCT?

All Stanley items comply with Prop 65 and FDA requirements. Also, all contact surfaces are guaranteed to be safe and BPA-Free. The steel we use is 18/8, or grade 304, otherwise known as food-grade stainless steel. Like all of our products, our stainless-steel items must pass rigorous health and safety tests before making them available to the public.


CAN I PUT MILK OR DAIRY PRODUCTS INSIDE MY VACUUM PRODUCT?

We do not recommend putting milk or dairy products in our vacuum bottles or food jars for extended periods of time, as bacteria growth can occur at specific temperatures. Fermenting food and beverages may also cause pressure to build up over time. For more information on milk and dairy products, please consult the U.S. FDA at www.fda.gov.


CAN I PUT DRY ICE INSIDE MY VACUUM PRODUCT?

It is not recommended to use dry ice in a sealed container as the rapid evaporation of the CO2 from solid to gas can produce unwanted pressure within your product. Please proceed carefully at your own risk.


WHAT BRUSH SHOULD I USE FOR MY STAINLESS PRODUCT?

You may use any soft brush to clean your Stanley vacuum bottle or food jar. Please do not use a metal brush, as this could scratch the stainless-steel surfaces.


HOW SHOULD I CLEAN MY PRODUCT?

Please check the bottom of your product to see if it is dishwasher safe. If not, we recommend hand washing. Be sure to wash your product before first use.


1. Fill with warm water and mild detergent.

2. Let stand for 5 minutes.

3. Wash with a soft, damp cloth or sponge.

4. Rinse and dry with a clean towel.

5. Your product may need a deep clean occasionally. For this, we recommend letting a mixture of one-part baking soda and one-part warm water soak for up to an hour, after rinsing out this mixture, clean with mild detergent.


HOW DO I CLEAN THE GASKETS IN MY PRODUCT?

To thoroughly clean under the gasket or seal, we recommend soaking the top of the cup in white vinegar, lemon juice, or a mixture of warm water and baking soda. With some products, the gasket or seal can be carefully removed with a small tool or instrument and soaked separately.


HOW DO I REMOVE STAIN OR SMELL IN MY PRODUCT?

To clean your product, we recommend washing with warm water and a standard, non-abrasive household cleaner. These cleaners can be applied with bristle brushes, sponges, or clean cloths. Soaking the product in a mixture of warm water and baking soda might also help. Some customers have reported that a soak in white vinegar or lemon juice also removes stains and smells. After using cleaners, always wash your product thoroughly as recommended in our care and use instructions. Repeat as necessary until stains or smells disappear. A stainless-steel cleaner or polish can also be used on stainless steel products.


IS MY PRODUCT DISHWASHER SAFE?

The bottom of your product will indicate that if it is dishwasher safe. For these products, we always recommend that you put them on the top rack. Please hand-wash any items that are not dishwasher safe.


IS MY PRODUCT MICROWAVE SAFE?

A vast majority of our products are made using stainless steel. Even items where stainless steel is not the primary body material, there may still be stainless steel in the hinges, handles, and other places. As a result, it is not recommended that you put our products in the microwave. Doing so can result in damage to your product and appliance.


WHAT TYPE OF PLASTIC WAS USED WITH MY BOTTLE STOPPER?

Our products are FDA tested and approved, and all contact surfaces are guaranteed to be safe to use with food and beverages. The type of outer plastic material we use for our stoppers is BPA-free polypropylene.


CAN I PUT MY PRODUCT IN THE FREEZER?

We do not recommend putting any of our products in the freezer. Liquids expand as they freeze, and your item will not return to its original shape (let's be honest, most of us don't). This expansion can result in damage to your product that will affect its functionality, thermals, and seals.


HOW DO I REMOVE RUST IN MY PRODUCT?

When properly cared for, our products are made of high-grade stainless steel and will last a lifetime. If you notice corrosion that appears to be rust, it could be free-iron particles, dirt, or residue that has contaminated the surface. A standard, non-abrasive household cleaner can be used to free contaminants from the surface, removing these particles. These cleaners can be applied with bristle brushes, sponges, or clean cloths. A stainless-steel cleaner or polish can also be used. Soaking the product in a mixture of warm water and baking soda, white vinegar, or lemon juice might also help. Repeat as necessary to get the desired result. After using cleaners, always wash your bottle thoroughly as recommended in our care and use instructions.